MPLS VPNs transport layer 2 packets across the network and encapsulate transport protocols such as ATM, Ethernet, and SONET, allowing MPLS networks to seemlessly upgrade and replace legacy layer 2 networks without requiring network reconfiguration or using protocols higher than layer 2. In comparison, layer 3 VPNs must use the layer 3 Internet Protocol (IP).

An Internet T1 (or T-1) T1 is a symmetrical local access connection to an Internet port that allows for downloads and uploads of up to 1.5 Mega Bits Per Second (Mbps) which is 30 times as fast as a 56 Kilo Bits Per Second (Kbps) dial-up connection over a standard Plain Old Telephone Service (POTS) phone line.

Many VoIP service providers guarantee that phone calls will not travel over the public Internet, but are converted and transmitted over the traditional telephone network directly from the VoIP provider's private Internet network that usually adheres to a defined Quality of Service (QoS).

The ADSL downstream receiving rate from the Internet usually varies from 1.5 to 9Mbps while the upstream sending rate usually varies from 16 to 640 Kbps.

Our Future and Vision: Our goal is to build a bond of trust with you, our client, that will last for years to come. We will earn your trust by finding "the right" solution every time. Call us at (888) 255-5859.

MPLS VPNs use Multiprotocol Label Switching (MPLS) to set up Virtual Private Networks (VPNs) that can isolate data traffic to provide Class of Service (CoS), Quality of Service (QoS), and ease network administration with minimal network overhead. Layer 3 MPLS VPNs (L3VPNs) use BGP, traffic isolation and Virtual Routing / Forwarding (VRF) for network routing and security. MPLS VPNs are more efficient and robust than IPSec VPN, ATM, MPLS L3VPNs.

Connect your business local area network (LAN) to the Internet using the same protocol that operates on your LAN: Ethernet. This increasingly popular Internet access solution makes it easy to connect all of the computers on your LAN at your company to the Internet with minimal configuration and cost.

Digital Subscriber Line Service (DSL) has become a very popular Internet access service. This is because DSL uses the existing copper pairs that already exist between most customer premise offices and the local phone company central office (CO). A DSL connection is set up between a DSL modem at the customer premise and a DSL access multiplexer, or DSLAM, at the phone company central office. Both voice and data can be run across the same DSL connection by using a filter to separate voice traffic from Internet traffic.

Telecom Links reveals the secrets of telecom technology from the first radio to the latest fiber optic technologies.

Telecom Links mission is to be a comprehensive source of telecommunications information on the World Wide Web.

MPLS can be used to facilitate layer 3 IP VPNs, layer 2 VPNs, Quality of Service (QoS), Class of Service (CoS) and to guarantee Service Level Agreements.